Menu
Orçamento

CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER

CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
Visto 47
  • PDF Title

    CATÁLOGO TÉCNICO :

CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER

DESCRIÇÃO

Product Classification

Regional Availability Latin America

Portfolio NETCONNECT®

Product Type Twisted pair cable


GENERAL SPECIFICATIONS

Product Number CS44Z1

ANSI/TIA Category 6A

Cable Component Type Horizontal

Cable Type F/UTP (shielded)

Conductor Type, singles Solid

Conductors, quantity 8

Drain Wire Type Solid

Jacket Color Blue

Pairs, quantity 4

Separator Type Isolator

Transmission Standards ABNT/NBR 14703 | ANSI/TIA-568.2-D | Anatel | ISO/IEC 11801 Class EA


DIMENSIONS

Cable Length 304.8 m | 1000 ft

Diameter Over Conductor 1.140 mm | 0.0449 in

Diameter Over Jacket, nominal 7.188 mm | 0.283 in

Conductor Gauge, singles 23 AWG

Drain Wire Gauge 26 AWG


ELECTRICAL SPECIFICATIONS

Characteristic Impedance 100 ohm

Characteristic Impedance Tolerance ±15 ohm

dc Resistance, maximum 6.66 ohms/100 m | 2.03 ohms/100 ft

Delay Skew, maximum 45 ns

Dielectric Strength, minimum 1500 Vac | 2500 Vdc

Mutual Capacitance at Frequency 5.6 nF/100 m @ 500 MHz

Nominal Velocity of Propagation (NVP) 64 %

Operating Voltage, maximum 80 V

Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Segregation Class c


MATERIAL SPECIFICATIONS

Conductor Material Bare copper

Insulation Material Polyolefin

Jacket Material Low Smoke Zero Halogen (LSZH)

Shield (Tape) Material Aluminum/Polyester


MECHANICAL SPECIFICATIONS

Pulling Tension, maximum 11.34 kg | 25 lb


ENVIRONMENTAL SPECIFICATIONS

Installation temperature 0 °C to +60 °C (+32 °F to +140 °F)

Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)

Acid Gas Test Method IEC 60754-2

EN50575 CPR Cable EuroClass Fire Performance No Rating

Environmental Space Low Smoke Zero Halogen (LSZH)

Flame Test Method ABNT/NBR 14705 | IEC 60332-1

Smoke Test Method IEC 61034-2


PACKAGING AND WEIGHTS

Packaging Type Reel


REGULATORY COMPLIANCE/CERTIFICATIONS

Agency Classification

ROHS Compliant